200W Flex ATX12V Power Supply for Achme AM630BS20S, Enhance ENP-2320A, Shuttle PS-X200W, FSP200-50PLA2, FSP200-50PLB

This Flex ATX power supply is a 200W, ball-bearing fan, UL, CSA, CB, CE, TUV, and NEMKO approvals. Compact size (150Lx81.5Wx40.6H mm) allows use in many situations, including 1U chassis. Airflow drawn out of case into surroundings by 40mm internal fan. Many positives --- small, powerful, autoranging, PFC, ball bearing fan. Manufacturer p/n 200SA2FX. Replacement for: Achme AM630BS20S, Enhance ENP-2320A, Shuttle PS-X200W, FSP200-50PLA, FSP200-50PLB, Mini iTX case GA610i.

This power unit has (1) 20+4 pin ATX connector, (1) ATX12V connector, (2) peripheral power connectors, (1) SATA connector, and (1) floppy drive connector.

Note: If you own the early Shuttle SS51G & SV25 with the wires coming out the top (long side) of the power supply, this model may not fit in your case.

Type Mini ITX
Maximum Power 200W
Fans Single 4cm DC Fan without fan grill
PFC Active
+12V Rails Single
SATA Power Connector 1
Power Good Signal 100-500ms
Hold-up Time 16.6ms min.
Over Voltage Protection Yes
Overload Protection Yes
Input Voltage 110-120V / 200-240V
Input Frequency Range 50/60 Hz
Output +3.3V 16.7A, +5V 13A, +12V1 9.5A, -12V 0.3A, +5VSB 2.0A
Dimensions 1.69" x 5.91" x 3.23"