200W Flex ATX Replacement PSU Bulk for Shuttle XPC SN45G Power Supply

This Flex ATX power supply is a 200W, ball-bearing fan, UL, CSA, CB, CE, TUV, and NEMKO approvals. Compact size (150Lx81.5Wx40.6H mm) allows use in many situations, including 1U chassis. Airflow drawn out of case into surroundings by 40mm internal fan. Many positives --- small, powerful, autoranging, PFC, ball bearing fan. Manufacturer p/n 200SA2FX. Replacement for: Achme AM630BS20S, Enhance ENP-2320A, Shuttle PS-X200W, FSP200-50PLA, FSP200-50PLB, Mini iTX case GA610i.

This power unit has (1) 20+4 pin ATX connector, (1) ATX12V connector, (2) peripheral power connectors, (1) SATA connector, and (1) floppy drive connector.

Compatibility:
Power: Achme AM630BS20S /Enhance ENP-0812A /Fortron FSP200-50PLA
Shuttle PS-X200W /WIN-200PS (original PS has extra 6 pin auxiliary connector)
Computers:
SOLTEK EQ2000 - 200W PFC
SOLTEK EQ3701M - 200W PFC
Shuttle XPC SB51G/SB51GB - 200W PFC
Shuttle XPC SB52G2 - 200W
Shuttle XPC SB61G2 - 200W PFC
Shuttle XPC SS51G/SS51G1(v2.0) - 200W PFC
Shuttle XPC SS50C - 160W/150W PFC
Shuttle XPC SV24/SV25/FV25 - 150W
Shuttle XPC SN45G - 200W PFC up to 190mm
Shuttle XPC SK41G - 200W PFC
Shuttle XPC SN41G2 - 200W PFC
Shuttle XPC SN41G2B - 200 PFC
Shuttle XPC SS40G - 200W PFC
Shuttle XPC SK41G - 200W PFC

Note: If you own the early Shuttle SS51G & SV25 with the wires coming out the top (long side) of the power supply, this model may not fit in your case.

Type Mini ITX
Maximum Power 200W
Fans Single 4cm DC Fan without fan grill
PFC Active
+12V Rails Single
SATA Power Connector 1
Power Good Signal 100-500ms
Hold-up Time 16.6ms min.
Over Voltage Protection Yes
Overload Protection Yes
Input Voltage 110-120V / 200-240V
Input Frequency Range 50/60 Hz
Output +3.3V 16.7A, +5V 13A, +12V1 9.5A, -12V 0.3A, +5VSB 2.0A
Dimensions 1.69" x 5.91" x 3.23"